home *** CD-ROM | disk | FTP | other *** search
- bar@se.houston.geoquest.slb.com (Berny Rieckhoff) wrote:
- >
- >Hi Y'all!
- >
- >Last night I Installed the Humungouse MUI3.1-user on my WorkBench3.0 (Boot)
- >partition of my A1200. upon rebooting I got a "Checksum error on Block ????
- >on drive HD0" or words to that effect. Multiple retries couldn't get past it,
- >so I cancelled and boot proceeded normally. Opening (double click) my WB Icon
- >or doing dir/all produces the same error immediately, although likewise
- >after cancelling the requester everything proceeds normally. using show
- >all files in the WB window liokewise produces the error, but double clicking
- >anything except the MUI directory pruduces no error. double clicking the MUI
- >drawer of course brings up the requester, but a cancel allows the contents to
- >display fine.
- >
- >What are the best steps to take ?
- >
- >Is there some repair that may avoid a full reformat/verify ? ie
- >could I delete MUI drawer, and mark that block bad ? If so how.
- >
- >The drive is a Seacrate 120M IDE internal to the A1200.
- >
- >I have the usual ADos 3.0 tools.
- >
- >
- >Thanks for any help
-
- Get DiskSalv v2 from Aminet. If you like it, purchase DiskSalv v3 from Dave
- Haynie.
-
- --
- Owner and wielder of Occam's razor! (Committed to regula philosophandi)
-
- _/_/_/ _/ _/ Chris "Big Kahuna" Rampson M.S.
- _/ _/_/_/ _/ _/_/ _/_/_/ crampson@ford.com
- _/ _/ _/ _/_/ _/ _/_/ NO cutdowns, flames or insults
- _/ _/ _/ _/ _/ _/_/ NO such thing as a stupid question!
- _/_/_/ _/ _/ _/ _/ _/_/_/ "NOT an OFFICIAL FORD spokesperson"
-
-